PWS5A00T-P

	File name	Date
	HMI I/O Controller Product Information (PIEN259A)	2022-10-10 09:11:02
	Important Notice: Battery Related Information (PI00154)	2022-10-06 12:08:21

	File name	Date
	HMI I/O Controller Patch for H-Designer v6.3.1 b169	2022-09-19 08:52:30

	File name	Date
	HMI I/O Controller leaflet (BREN515A)	2022-10-06 12:22:47
	PWS Catalogues & Brochures	2022-10-10 11:38:46
	PWS Series Brochure (BRxx500C)	2022-10-06 12:17:16
	H-Series Brochure (BRxx460I)	2022-10-06 12:16:13

	File name	Date
	H-T40m-P HMI I/O Controller Installation Manual (MAEN987)	2024-01-23 08:54:15
	Installation & Operation Guide PWS6560 (Chinese version)	2022-10-10 09:11:00
	Installation & Operation Guide PWS6300 (Chinese version)	2022-10-10 09:11:00
	Installation and Operation manual H-K30 (MA00823A)	2022-10-10 09:11:01
	Installation & Operation Guide PWS6A00 (Chinese version)	2022-10-10 09:10:39
	Installation & Operation Guide PWS6800 (Chinese version)	2022-10-10 09:10:39
	Installation & Operation Guide PWS6500 (Chinese version)	2022-10-10 09:10:34
	Installation & Operation Guide PWS6400 (Chinese version)	2022-10-10 09:10:34
	Installation & Operation Guide PWS5610 (Chinese version)	2022-10-10 09:10:33
	Installation & Operation Guide PWS6600T (Chinese version)	2022-10-10 09:10:36
	Installation & Operation Guide PWS6620 (Chinese version)	2022-10-10 09:10:37
	Installation & Operation Guide PWS6700 (Chinese version)	2022-10-10 09:10:38
	Installation & Operation Guide PWS6600 (Chinese version)	2022-10-10 09:10:35
	Installation & Operation Guide PWS6710	2022-10-10 09:10:21
	PWS Operation & Installation Manuals	2022-10-06 12:15:39
	Installation and Operation manual H-T40 (MAEN945B)	2022-10-06 11:59:36
	H-Designer Reference Manual (MAEN822B)	2022-09-14 11:03:23
	Installation and Operation manual H-T80 (MAEN833A)	2022-10-06 12:00:58
	Installation and Operation manual H-T70 (MAEN922)	2022-10-06 12:00:45
	Installation and Operation manual H-T60 (MAEN824E)	2022-10-06 12:00:42
	Installation and Operation manual H-T50 (MA00825A)	2022-10-06 11:59:38
	PWS Operation and Installation Manual (Eng ver)	2022-10-10 11:38:09
	Installation and Operation manual H-T100 (MAEN834A)	2022-10-06 11:59:29
	Reference manual for H-Designer (MAEN822B)	2022-10-10 09:10:53

	File name	Date
	Using the HMI I/O Controller for H-T40m-PA (SUEN278A)	2022-10-10 09:11:03
	LHT series Operator Panels Communicating with Siemens S7-200 PPI (SUEN275)	2022-10-03 17:16:28
	Downloading a Project to an LHT series Operator Panel (SUEN276)	2022-10-10 09:11:12
	H-Series Communicting with Siemens S7-200 PPI (SUEN252A)	2022-10-06 12:17:47
	H-Series USB Functions	2022-09-14 11:04:24
	H-series: Operator terminals communicating with Siemens S7-200 PPI (SUEN252A)	2022-10-03 17:16:11

	File name	Date
	Cable between the H-series and Alpha2	2022-09-19 16:15:49
	Drawing for H-series pin converter 660062-07	2022-09-19 16:15:58
	Data exchange in H-series?	2022-09-19 16:11:21
	Collect data from a H-terminal?	2022-09-20 11:03:46
	Driver The H-terminal's MPI address	2022-11-22 20:18:06
	Driver - ControlLogix: Mapping DF1-addresses (PLC/SLC) in ControlLogix (KI00245)	2022-10-25 19:44:25
	Download and upload application from USB or CF	2022-09-20 11:14:58
	Download an application to an H-terminal using a modem connection?	2022-09-19 16:11:01
	Communication problem H-series - DIP-switch settings	2022-11-16 15:41:42
	Lonworks interface	2022-10-06 12:14:32
	Driver H-Driver AB SLC5/03, 5/04: H-Series driver for Controllogix Ethernet	2022-10-06 12:12:27
	Driver H-Driver AB SLC5/03, 5/04: Cable between H-terminal and AB SLC	2022-10-06 12:12:37
	How many multi-link slaves can be connected to one master?	2022-09-20 11:14:14
	How to Download to H-series via USB cable	2022-10-10 09:11:10
	H-Series equipped with Web browser?	2022-09-14 10:51:02
	H-series printer support	2022-09-14 10:53:33
	H-Series Operator Terminals and ASCII communications	2022-09-14 10:53:08
	H-series error codes	2022-09-14 10:52:07
	HT80 and HT100 serial ports	2022-09-19 12:36:59
	Communication problem H-series - DIP-switch settings	2022-09-19 16:13:47
	CF and USB models for the H-series	2022-09-19 12:41:42
	Hitech PWS920 - PDF	2022-09-19 12:37:11
	Cables : Where find communication cable drawings for the H-series	2022-10-06 12:04:44
	Calibrate H-terminal's touchscreen	2022-09-19 12:42:23
	Examples of ladder logic in H-Series	2022-09-14 10:55:04
	Programming software for PWS 920S	2022-09-14 11:10:48
	Connecting to Allen-Bradley Micrologix 9-pin D-sub communications port	2022-09-19 12:39:03
	Slow update/communication	2022-09-14 11:10:18
	Driver H-Driver AB SLC5/03, 5/04: Which checksum-type is used in the driver	2022-10-06 12:12:10
	Driver H-Driver Mitsubishi MELSEC-Q(CPU): H-series connected to Melsec Q-CPU	2022-10-06 12:09:57
	Connecting H-Series Network terminal to Beckhoff CX1000 controller via ethernet	2022-09-19 16:12:20
	Driver H-Driver Facon FB Series (RS232-RTS): Connect H-terminal to Fatek FBs-CB2	2022-10-06 12:11:24
	Driver H-driver AB DH-485: DH+ driver for H-Series?	2022-10-06 12:12:54
	Driver H-Driver Computer (as master): Computer As Master or Slave protocol	2022-10-06 12:11:56
	Driver H-Driver ModBus Slave: Terminal as Modbus Master - bit addressing?	2022-10-10 09:11:08
	Driver MODICON Modbus Master: Communication to Eurotherm Mini 8	2022-10-10 09:11:09
	Driver H-Driver OMRON CJ1M: The syntax for bit addressing	2022-10-10 09:11:08
	Driver H-Driver Simatic S7-300 (via MPI port): The H-terminal's MPI address	2022-10-06 12:21:33
	Driver H-Driver Modicon TSX Micro: Modbus or Unitelway?	2022-10-10 09:11:08
	Upload and convert PWS application	2022-09-14 11:09:27
	Drivers in ADP / H-designer that support on-line simulation	2022-10-05 12:25:09
	H-series - Is the internal memory volatile?	2022-09-19 12:38:06

	File name	Date
	ADP & H-Designer v6.12 B200	2022-10-10 11:25:25
	H-Designer V6.7.0 b193	2022-10-10 09:10:48
	H-Designer V6.9.0 B196	2022-10-10 09:10:27
	H-Designer V6.8 B195	2022-10-10 09:10:40
	ADP V6.9.0-B196	2022-10-10 09:10:23
	ADP6.13 B203	2022-10-10 11:26:14
	ADP V6.16 build 206	2022-12-08 12:03:50
	ADP V6.15 build 205	2022-12-08 12:03:47
	ADP v6.10-B197	2022-10-10 09:11:13
	X2 base ADP	2022-10-06 12:02:35

	File name	Date
	H-K30 Outline/Panel Cut-Out	2022-10-10 09:11:02
	PWS6300 Outline/Panel Cut-Out	2022-10-10 09:11:02
	H-T100 Outline/Panel Cut-Out	2022-10-06 12:26:10
	H-T40m Outline/Panel Cut-Out	2022-10-06 12:26:14
	H-T80 Outline/Panel Cut-Out	2022-10-06 12:26:15
	H-T70 Outline/Panel Cut-Out	2022-10-06 12:26:15
	H-T60 Outline/Panel Cut-Out	2022-10-06 12:26:15
	H-T50 Outline/Panel Cut-Out	2022-10-06 12:26:15
	PWS6400 Outline/Panel Cut-Out	2022-10-06 12:26:16
	PWS5610 Outline/Panel Cut-Out	2022-10-06 12:26:16
	PWS6500 Outline/Panel Cut-Out	2022-10-06 12:26:16
	PWS6560 Outline/Panel Cut-Out	2022-10-06 12:26:16
	PWS6600 Outline/Panel Cut-Out	2022-10-06 12:27:01
	PWS6A00 Outline/Panel Cut-Out	2022-10-06 12:27:06
	PWS6710 Outline/panel cut-out	2022-10-06 12:27:06
	PWS6700 Outline/Panel Cut-Out	2022-10-06 12:27:05
	PWS6620 Outline/Panel Cut-Out	2022-10-06 12:27:05
	PWS6800 Outline/Panel Cut-Out	2022-10-06 12:27:05

	File name	Date
	PWS series DoC CE	2022-10-10 09:11:04
	PWS6710 FCC (PWS,H,MS) certification	2022-10-10 09:10:20
	PWS6710 CE (PWS,H,MS) certification	2022-10-10 09:10:11
	China Compulsory Certification for Beijer Electronics Products	2022-10-10 09:18:04
	Hardware Tests and Certificates for Beijer Electronics Products (PIEN182D)	2022-10-10 09:17:56
	Declaration of conformity H-T60t-PeA	2022-10-10 11:38:55
	Reach 及 RoHS 聲明(英文版)	2022-10-10 11:38:58

HMI I/O Controller Product Information (PIEN259A)

HMI_I_O_Controller_PIEN259A.pdf

Important Notice: Battery Related Information (PI00154)

The H-T60 operator terminals of hardware revision 1 are equipped with a rechargeable battery. This document contains important information such as indication of when the battery needs to be charged, how to prevent loss of recipe data, etc.

PI00154.pdf

HMI I/O Controller Patch for H-Designer v6.3.1 b169

The patch corrects a bug in H-Designer v6.3.1 b169 that made it impossible to use more than one HMI I/O controller. It is now possible to use up to 16 HMI I/O controllers simultaneously with an H-T40m-P.

The driver file attached needs to be copied to the Driver folder of H-Designer to update .

plciod.tsk

HMI I/O Controller leaflet (BREN515A)

H_T_40_I_O_Module_BREN515A_english.pdf

PWS Catalogues & Brochures

PWS CH catalogue

PWS EN Catalogue

PWS Series Brochure (BRxx500C)

- PWSbrochure_BRTW500C.pdf

- PWSbrochure_BREN500C.pdf

H-Series Brochure (BRxx460I)

H-series general brochure in English and Turkish

H-T40m-P HMI I/O Controller Installation Manual (MAEN987)

The H-T40m-P operator panel can be equipped with the HMI I/O Controller, an expansion I/O module aimed at providing smaller system applications with simple I/O control interface without the need for a PLC. The compact expansion module is easy to install and fits seamlessly on the back of the operator panel. This manual describes the installation and operation of the HMI I/O Controller.

EM-IOB-88-00-RC 8 digital inputs 8 digital relay outputs

EM-IOB-C4-00-RC 12 digital inputs 4 digital relay outputs

EM-IOB-84-00-RS 8 digital inputs 4 digital relay outputs

HMI_I_O_Controller_MAEN987.pdf

Installation & Operation Guide PWS6560 (Chinese version)

Installation & Operation Guide PWS6300 (Chinese version)

Installation and Operation manual H-K30 (MA00823A)

Installation and operation manual for the H-K30 operator terminal. Includes technical data.

H-K30.pdf

Installation & Operation Guide PWS6A00 (Chinese version)

Installation & Operation Guide PWS6800 (Chinese version)

Installation & Operation Guide PWS6500 (Chinese version)

Installation & Operation Guide PWS6400 (Chinese version)

Installation & Operation Guide PWS5610 (Chinese version)

Installation & Operation Guide PWS6600T (Chinese version)

Installation & Operation Guide PWS6620 (Chinese version)

Installation & Operation Guide PWS6700 (Chinese version)

Installation & Operation Guide PWS6600 (Chinese version)

Installation & Operation Guide PWS6710

PWS Operation & Installation Manuals

Operation & Installation manuals of PWS series, available in both English and Traditional Chinese.

Installation and Operation manual H-T40 (MAEN945B)

Installation and operation manual for H-T40m.

H-T40m-P can be equipped with the HMI I/O Controller, an expansion I/O module aimed at providing smaller system applications with simple I/O control interface without the need for a PLC. The compact expansion module is easy to install and fits seamlessly on the back of the operator panel.

H_T40m_MAEN945B.pdf

H-Designer Reference Manual (MAEN822B)

Reference manual for the configuration tool H-Designer for the H-series

H_Designer_MAEN822B.pdf

Installation and Operation manual H-T80 (MAEN833A)

Installation and operation manual for the H-T80 operator panel. Includes technical data.

H_T80_MAEN833A.pdf

Installation and Operation manual H-T70 (MAEN922)

Installation and operation manual for the H-T70 operator panel. Includes technical data.

H_T70_MAEN922.pdf

Installation and Operation manual H-T60 (MAEN824E)

Installation and operation manual, including technical data for the H-T60 operator panel with rechargeable battery. See also information document PI00154 for battery related information.

H_T60_MAEN824E.pdf

Installation and Operation manual H-T50 (MA00825A)

Installation and operation manual for the H-T50 operator terminal. Includes technical data.

H-T50.pdf

PWS Operation and Installation Manual (Eng ver)

PWS

Installation and Operation manual H-T100 (MAEN834A)

Installation and operation manual for the H-T100 operator panel. Includes technical data.

H_T100_MAEN834A.pdf

Reference manual for H-Designer (MAEN822B)

Reference manual for the configuration tool H-Designer for the H-series. MAEN822B: English manual

Using the HMI I/O Controller for H-T40m-PA (SUEN278A)

This document describes how to set up the EM-IOB for H-T40m-PA with the 
HMI I/O controller, and how to use on/off objects, macros and ladder.

HMI_I_O_Controller_SUEN278A.pdf

LHT series Operator Panels Communicating with Siemens S7-200 PPI (SUEN275)

Siemens S7-200 ist eine kleine Produktgruppe von CPUs die über ein PPI Protokoll kommunizieren können. Das PPI (Punkt zu Punkt Schnittstelle) ist ein Multi Master Protokoll. Die LHT Serie kann mit der Siemens S7-200 CPU kommunizieren, indem es dieses PPI Protokoll verwendet. Die Kommunikation läuft über RS485 im Bedienpanel.

Siemens S7-200 is a smaller range of CPUs that can communicate over a PPI protocol. The PPI (Point to Point Interface) is a multi master protocol. The LHT-series can communicate with the Siemens S7-200 CPU using the PPI protocol via the RS485 interface in the operator panel.

LHT_S7_200_PPI_SUEN275.pdf

Downloading a Project to an LHT series Operator Panel (SUEN276)

Dieses Dokument beschreibt, wie man ein H-Designer Projekt über eine serielle Verbindung, Ethernet oder USB auf ein Bediengerät der LHT Serie downloaden kann.

This document describes how to download an H-Designer project to an LHT-series operator panel via a serial connection, Ethernet or USB.

LHT_Project_Download_SUEN276.pdf

H-Series Communicting with Siemens S7-200 PPI (SUEN252A)

This document describes how to connect the RS485 interface on the H-series operator terminals to Siemens S7-200 CPU using the PPI protocol.

H_series_S7_200_PPI_SUEN252A.pdf

H-Series USB Functions

The document describes how to use the new USB functions in the latest H-Designer release.

H-Series USB functions.pdf

H-series: Operator terminals communicating with Siemens S7-200 PPI (SUEN252A)

This document describes how to connect the RS485 interface on the H-series operator terminals to Siemens S7-200 CPU using the PPI protocol.

H_series_S7_200_PPI_SUEN252A.pdf

Cable between the H-series and Alpha2

Mitsubishi's cable (AL2-GSM-CAB) in combination with

You need to connect these two cables together to communicate between the H-series and Mitsubishi Alpha2.

Drawing for H-series pin converter 660062-07

Problem:
Drawing for H-series pin converter 660062-07

Soultion:
It's a normal " 25 Pin male " to " 25 Pin male " converter .

Cable drawing

1---1
2---2
3---3
4---4
5---5
6---6
7---7
8---8
9---9
10---10
11---11
12---12
13---13
14---14
15---15
16---16
17---17
18---18
19---19
20---20
21---21
22---22
23---23
24---24

Data exchange in H-series?

There is no built-in dataexchange-function for the H-series but you can use macros to create a dataexchange. The macro-instructions BMOV/MOV moves data from one device to another, if you want to move data from one driver to another you can use the following syntax:

1/D0 = 2/W0

BMOV(1/D0, 2/W0, 10)

1/ and 2/ means which driver that you are addressing (compare to @1 and @2 in Cimrex/Exter series).

Collect data from a H-terminal?

The terminal could be a Modbus TCP Server and the PC could be a Modbus TCP Client. On the PC-side you can use either an OPC-solution or an application with implemented Modbus TCP-support (e.g activeX-component).

Driver The H-terminal's MPI address

If you want to connect a H-terminal to a Siemens S7-300 over MPI then the terminal's MPI address must be lower than the PLC's MPI address.

Driver - ControlLogix: Mapping DF1-addresses (PLC/SLC) in ControlLogix (KI00245)

The Allen-Bradley DF1 protocol is available for all operator panels.
When connecting the operator panels to the Allen-Bradley ControlLogix controllers using the protocol DF1 via serial cable, a mapping must be made in the Allen-Bradley Logix system.

KI00245.pdf

Download and upload application from USB or CF

You can use an action button to trigger an upload/download from a USB-stick/CF card.

Download application:

Upload application:

Download an application to an H-terminal using a modem connection?

Yes, it's possible to download an application to a H-terminal over a modem connection.

During my tests I had a Powerbit modem connected to the PC, it was initialized with the following string:

AT&F &D0 &K0 &W

The answering modem (connected to the terminal) was also a Powerbit modem, it was initialized with the following string:

AT&F &D0 &K0 Q1 E0 S0=1 &C1 &W

Both modems was configured to use 8 databits, even parity and 1 stopbit and 9600 bps. 9600 bps is the highest baudrate that you can use today (H-Designer always starts at 9600 and then change to the baudrate that you have selected in the Transmission setup). This means that you will also have to select 9600 in the Transmission setup dialog in H-Designer.

You can use a normal "straight" modem cable between the terminal and the modem.

To dial-up the remote modem (and terminal) I used Cimrex Tools Connect, the software was configured to use 8 databits, even parity, 1 stopbit and 9600 bps.

Communication problem H-series - DIP-switch settings

Please check that the DIP switches for communication parameters and for the com port are right, SW5 and SW10. Refer to the attached document.

Lonworks interface

At this moment LonWorks support only exists for PWS-terminals. The terminals are called AP1600 Color/Mono (and are PWS6600/HT60 with a modified firmware).

Lonwork Operating Guide.zip

Driver H-Driver AB SLC5/03, 5/04: H-Series driver for Controllogix Ethernet

At the moment there are no plans on implementing an AB CLX driver for H-series. In most cases it's not interresting connecting a low-price HMI to a high-end/expensive PLC-system.

It's possible to connect a H-Terminal to an AB CLX by using the serial DF1-driver.

Driver H-Driver AB SLC5/03, 5/04: Cable between H-terminal and AB SLC

Picture below describes a communication cable between a H-terminal and a SLC500/3. This information can also be found in the H-Designer manual (chapter 9).

How many multi-link slaves can be connected to one master?

It's possible to connect up to 7 Multi-link slaves to 1 master (over either RS485 or Ethernet)

Note!

For H-series, we have two ways of linking terminals and PLC together, one is Multi-link the other is Cross-link.

For Multi-link,
the meaning is 1 Master terminal connect to PLC, then all other terminals act as slave without connect to PLC and receive data from Master terminal. Theoretically there is no limitation on the number of slaves connected to the network. However, in real practice, speed of data transfer will be affected by many different things, such as distance, cable used... etc.

If you are using COM port as link between each terminal, of course it will be much slower than using Ethernet.

We have many customers using Multi-link function, and from experience, the best performance is when 2 slaves on network, or if more than 7 slaves the refresh rate of data will be much slower.

For Cross-link,
the meaning is each terminal connects to own PLC, and through network all terminals can exchange data between each PLCs.

The performance in Cross-link is better than Multi-link.

How to Download to H-series via USB cable

Download a aplication to H-series via USB cable:

Open the terminal’s System Menu
Click on F2 (”Config”)
Change Download/Upload/Copy port to USB

Conect a standard USB Host cable, Windows will recognize that a USB device is connected..
Use the USB-driver is located in C:\Program Files\H-Designer\v6.1.1.03\ when windows asks for it

H-Series equipped with Web browser?

At the moment there are no plans on implementing web browser support for H-series.

H-series printer support

Q: We are experiencing difficulty with printing to a HP printer using the HP PCL Laserjet driver in H-Designer. Can you supply further information on the printers required ie PCL 3 or 5 type printers?

A: H-designer, B167, will handle both standards. This build support PCL3 and PCL 5 HP-printers however, H-designer does not include drivers for all HP-models. Recommended printers are: HP Laserjet 2700 series, HP officejet 5000 series and HP Photosmart series.

H-Series Operator Terminals and ASCII communications

H-Series terminals have capability to send and receive serial communication data outside of the terminals dedicated controller system communications.

This ability has different applications and works in specific ways using specific settings and programming.

1. The terminal can display a Terminal Window Object in graphic screens. This terminal window can display received data in ASCII or Hex formats.

You can send ASCII characters from the terminal with the Set Value Button Tool - in ASCII mode. The limitation here is that you will only send printable characters - there is no way to send control characters, ex. Carriage Return+Line Feed.

To use these functions the Controller / PLC Selection in Workstation Setup should be set to ASCII Device. The Connection configuration determines the physical port and parameters to use.

In the Terminal Window object the Read Variable should be set to RX (receive).

In the Set Value Button Tool the Write Variable should be set to TX (transmit). Set Value should be set to Character String. Enter the characters you want to transmit directly in to the Set Value text box. Then when this object is activated (touched) these characters will be sent.

2. Computer protocol Master and Slave capability.

With this functionality the terminal will in Slave Mode (Computer as Master) respond to commands from a master to read and write internal variable data. This is a defined protocol using ASCII characters. The protocol is available upon request from Beijer Electronics.

With this functionality the terminal as a Master (Computer as Slave) will poll a slave device using this same ASCII protocol.

When using this function the terminal allocates internal memory to act as a slave device. The memory addresses W0 - W2047 for word devices, and B0 - B1023 for bit devices are used. In Master mode these same addresses are use has the valid device types and the terminal will generate the corresponding ASCII commands to the slave device.

3. Use Macro or Ladder instructions to send and receive data.

4. H-Series terminals offer Modbus ASCII Slave and Modbus ASCII Master communication drivers. Using this ASCII communication version of modbus would be similar to using the Computer Protocol as described. But in this case the Modbus Protocol is used. The terminal reveals its internal memory as Modbus aware addresses.

H-series error codes

Error codes:

0x00000080: system call error
0x00000091: Prefetch abort(instruction fetch memory fault)
0x00000092: Data abort(data access memory fault)
0x00000093: Undefined instruction
0x00000094: Reset

HT80 and HT100 serial ports

It is possible to use 3 serial drivers and all serial ports (COM 1,COM 2, COM 3) supports MPI.

COM 3 is the only port that supports baud rate 187.5k.

Communication problem H-series - DIP-switch settings

Please check that the DIP switches for communication parameters and for the com port are right, SW5 and SW10. Refer to the attached document.

CF and USB models for the H-series

1.The specification of the USB port is USB1.0. But you still can use the pen-drive which speed are USB2.0 or USB1.1 .
2.File system: FAT16 and FAT32 is ok.
3.Allocation Unit size: Default is ok.
We don't have special specification of pen-drive.We don't have the specification of pen-drive.
Attached file is the pen-drive that we have tested and works fine on our terminal.

Hitech PWS920 - PDF

PWS920 information pdf:

PWS920Ssp.pdf

Cables : Where find communication cable drawings for the H-series

The drawings for most of the drivers are available in the reference manual (chapter 9) for the H-series.

Calibrate H-terminal's touchscreen

The touch screen is calibrated in the System menu (press F4/Set -> Touch Panel).

Examples of ladder logic in H-Series

In the attached application you can find a small ladder-example (just some arithmetic operations).

Ladder example.zip

Programming software for PWS 920S

PWS 920 is a very old operator terminal, the programming software is DOS-based.

pws920.zip

Connecting to Allen-Bradley Micrologix 9-pin D-sub communications port

The H-series 9 pin to 9 pin download cable, will work for this application.

WPC-P8-42

Programming cable RS232 for all H -series. (4M), 9pin Female – 9 pin Male

602000059

Slow update/communication

If a customer complains about the update of a H-terminal you should first check that "block optimization" is enabled for all blocks in the application.

If block optimization is disabled the driver will only update 1 device/telegram. If an old PWS-project is converted to H-series/PWS6xxx-series the block optimization is disabled, this means that you will have to manually change this setting for all the blocks in the application.

If a new project is created in H-Designer, block optimization will be enabled per default.

Driver H-Driver AB SLC5/03, 5/04: Which checksum-type is used in the driver

In the Cimrex/Exter driver it's possible to select if you want to use either CRC or BCC checksum. This option is not available for the H-series driver, it uses BCC!

Driver H-Driver Mitsubishi MELSEC-Q(CPU): H-series connected to Melsec Q-CPU

The Q00-supports a special protocol called "Serial", and the Q00(CPU) driver is implemented based on this protocol and not the normal QCPU-protocol. The necessary steps are as follows:

- Create a new application in GX IEC Developer/GX Developer (Q00-CPU).

- Open the PLC parameter dialog (from the Project manager).

- Click on the tab called Serial.

- Enable Serial communication.

- Download the PLC-application and either reset or cycle the power of the PLC.

The Q00J-CPU does not support the serial communication protocol. The only solution available today is to use a C24-module and use the QnA-link driver instead.

Connecting H-Series Network terminal to Beckhoff CX1000 controller via ethernet

A document describing settings in TwinCat to allow communications between an H Series network capable HMI and a Beckhoff CX1000 series controller.

H Series to Beckhoff.pdf

Driver H-Driver Facon FB Series (RS232-RTS): Connect H-terminal to Fatek FBs-CB2

The cable described below will connect a H-terminal to Fatek FBs-CB2

3 --------------------------- 3
2 --------------------------- 2
5 --------------------------- 5
7 --- -- 7
| |
8 --- -- 8

Driver H-driver AB DH-485: DH+ driver for H-Series?

DH485 and DH+ is two different protocols/network standards. DH+ is a faster network than DH485 and we only support DH485. DH+ requires external hardware and that's why we have not implemented a driver. I know that there are converters available on the market (DF1 to DH+) but we have not tested any of these converters ourselves (you can find one of many examples on the web-site http://www.protocolconverter.com/products/dl3500dh+df1.htm). We have a DF1-driver available so it should be possible connecting yourselves to a DH+ network using a converter.

Driver H-Driver Computer (as master): Computer As Master or Slave protocol

A document that explains the "Computer as Master"-protocol is attached to this knowledge.

Computer Protocol.doc

Driver H-Driver ModBus Slave: Terminal as Modbus Master - bit addressing?

The newest version of H-Designer (6.1.1) includes a driver called Modbus RTU slave (beijer addressing) that supports bit-addressing.

Driver MODICON Modbus Master: Communication to Eurotherm Mini 8

To communication to the Eurotherm system Mini 8 you must change the default setting for the IP_address_2 from Strict(0) to Instr(2).

EurothermMini8.bmp

Driver H-Driver OMRON CJ1M: The syntax for bit addressing

What is the syntax for bit addressing of protocoll OMRON CJ1M ?

I've tried using bit device CIO0.00...CIO6143.15 it does not work, gives error 'Invalid write address'

ANSWER
For example bit device CIO0.00 ...CIO6143.15 will be syntax CIO0000 ...CIO0614315, see screenshot below.

According to driver File: /driver/p143.tsk
ADP PLC Configuration Address Range

< col>< col>< col>< col>

Word Device:

Word Devices	Address Radix	Min	Max	Size
CIO0	Decimal	0	6143	Word
CIO1	Decimal	1000	1199	Word
CIO2	Decimal	1500	1899	Word
CIO3	Decimal	2000	2959	Word
CIO4	Decimal	2960	2961	Word
CIO5	Decimal	3100	3189	Word
CIO6	Decimal	1200	1499	Word
CIO7	Decimal	1200	1499	Word
CIO8	Decimal	3800	6143	Word
H	Decimal	0	511	Word
A	Decimal	0	959	Word
D	Decimal	0	32767	Word
E	Decimal	0	32767	Word
TPV	Decimal	0	4095	Word
CPV	Decimal	0	4095	Word
W	Decimal	0	511	Word

Bit Device:

Word Devices	Address Radix	Address Format	Min	Max
CIO0	Decimal	nb; b:00-15	0	6143
CIO1	Decimal	nb; b:00-15	1000	1199
CIO2	Decimal	nb; b:00-15	1500	1899
CIO3	Decimal	nb; b:00-15	2000	2959
CIO4	Decimal	nb; b:00-15	2960	2961
CIO5	Decimal	nb; b:00-15	3100	3189
CIO6	Decimal	nb; b:00-15	3200	3799
CIO7	Decimal	nb; b:00-15	1200	1499
CIO8	Decimal	nb; b:00-15	3800	6143
H	Decimal	nb; b:00-15	0	511
A	Decimal	nb; b:00-15	0	959
TS	Decimal	n	0	2047
CS	Decimal	n	0	2047
W	Decimal	nb; b:00-15	0	511

Driver H-Driver Simatic S7-300 (via MPI port): The H-terminal's MPI address

If you want to connect a H-terminal to a Siemens S7-300 over MPI then the terminal's MPI address must be lower than the PLC's MPI address.

Driver H-Driver Modicon TSX Micro: Modbus or Unitelway?

The TSX Micro driver communicates with the PLC using Modbus.

Upload and convert PWS application

If an application should be converted from an older PWS terminal to new model, the application file, with the file extension .v3f, is necessary. The source can be uploaded from the terminal if a "download source" was previously made. If the source was not downloaded to the terminal it will not be possible to upload and convert the project.

Drivers in ADP / H-designer that support on-line simulation

Do we know and perhaps have a list of which protocols support Online simulation?

On-line simulation in H-Designer is supported for all drivers except for S7 300 and S7 200.

The system that have been tested with on-line simulation are

1. AB MicroLogix 1200

2. AB SLC 5/03

3.Delta DVP

4.Fatek

5.FUJI NB

6.HITACHI EH-150

7.Koyo

8. MATSUSHITAI FP0

9. Mitsubishi FX2n , FX3UC , Q00 CPU ,Q02 CPU

10. OMRON TPM1A , CJ1M

11. TAIAN TP02

12. Modbus

13.computer protocol

H-series - Is the internal memory volatile?

H-K30 --- The internal memory is volatile.

H-T50 --- The internal memory is volatile.

H-T60 standard --- The internal memory is volatile.

H-T60 plus --- The internal memory is non volatile.

H-T60 network --- The internal memory is non volatile.

ADP & H-Designer v6.12 B200

H-Designer V6.7.0 b193

Latest release version of H-Designer is version 6.7.0 B193.

H-Designer V6.7.0-B193.rar

H-Designer V6.9.0 B196

H-Designer V6.8 B195

H-Designer V6.8.0-B195_R4146 .rar

ADP V6.9.0-B196

ADP6.13 B203

ADP V6.16 build 206

ADP V6.16.0-B206_20211220.zip

ADP V6.15 build 205

ADP V6.15.0-B205_20210204.zip

ADP v6.10-B197