X2 control / X2 marine SC / BoX2 pro SC image V2.0 b775 (Obsolete)

​Image release for X2 series Soft Control devices (acirro+ from production only).

Link to related documents:

Codesys runtime, 3.5.13.30 Patch7
https://www.beijerelectronics.com/en/support/Help___online?docId=68403

• MAEN205D_BoX2 Image Manual.pdf
• New LED information.PNG
• X2 LastMinuteNotes PIEN345I.pdf
• X2 ReleaseNotes PIEN344I.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build775.exe

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC CODESYS Runtime 3.5.13.30 Patch 7 (obsolete)

​CODESYS Runtime with individual device xml for every single X2 device.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CODESYS-3.5.13.30_7.zip

X2 control / X2 marine SC / BoX2 pro SC image V2.1.1 build 906 (current version)

​Image supporting X2 control, X2 marine SC and BoX2 pro SC.

• BoX2 Image Manual MAEN205D.pdf
• X2 LastMinuteNotes 2.1.1.pdf
• X2 ReleaseNotes 2.1.1.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build906.exe

X2 control / BoX2 pro SC CODESYS Runtime 3.5.13.30 Patch 12 (Current version)

​SoftPLC runtime for X2 control 2.1.1 and later. Contains fixes for CmpPLCShell.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CoDeSys_3.5.13.30_12.zip
• Device XML.zip

BoX2 Erase / Delete Project with USB

The attached file is a .json that can be put on a USB stick and then plugged into a BoX2 to remove the project running on the device.

The following are the instructions on how to use it:

1. Put the attached json file in the root of an USB memory, it will be used to try delete the existing iX project on the BoX2 pro.
2. Plug the USB in while the BoX2 is running and wait until the LED turns red.
3. Remove the USB memory when the LED starts to flash purple and then reboot the BoX2.
4. When the BoX2 has booted the LED should flash purple which indicates that the unit is in standby and no iX project is running.
5. After this you should be able to transfer your iX project to the BoX2 from iX Developer.

• BoX2ConfigSet.zip

Box2 Diagnostics, manual and LED

• BoX2 Manual .pdf
• Box2Diagnostics.zip
• Box2Diagnostics_vnc.zip
• ReadBox2Diagnostics_OPCUA.zip
• ReadBox2DiagnosticsModbusTCP.zip

Box2 base / BoX2 pro (SC) / BoX2 extreme (SC), unknown IP \ reset \ reformat

​25.10.2019
IX 2.40SP4

If you have a BoX2, and do not know the IP of it, how can you then regain contoll of it?

- Port B in all X2 / BoX2 devices are default set to DHCP, so if lucky, you will find it by connecting the port B to a network with a DHCP service (e.g. your office)

- Secondary you need to create a new config file with the configuration software WARP, and then load this project (with known IP settings), from an USB stick. 

- The procedure on using WARP is described inn part 3.1.1 in the BoX2 manual attached, Beijer BoX2 Image Manual, User’s Guide, MAEN205 C
    

• BoX2 Manual .pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) LED indication

​24.10.2019

Status Diode of the Box2 has the following meaning:
Published in the box2 image manual 

• BoX2 Manual .pdf

BoX2 pro (SC) / BoX2 extreme (SC) - MTBF summary

The purpose of this document is to determine the reliability prediction according to the Telcordia 3 standard for the BoX2 products.

Valid for BoX2 pro / BoX2 pro SC / BoX2 extreme / BoX2 extreme SC

• MTBF Summary -box2.pdf

StartUp Program Example X2 control - BSD ver 3.31

​This StartUp program example contains everything you need in order to get your X2 control solution with Codesys SoftControl and BSD-products up and running with basic servo functionality.

Codesys_X2_control_V3.31 contains: 
 - Codesys project v3.31
- iX project v5.01 for X2 control  7
  
Programming software needed for the attached example:
- iX Developer v2.40 SP7
- CODESYS v3.5 SP13 Patch 3

• BSD SoftControl 331.zip

X2/Box2 image manual MAEN205

MAEN205F: describes the X2 series system program. 

• BoX2 Image Manual MAEN205D.pdf
• X2 Image Manual MAEN205F.pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Image Manual, MAEN205 rev C

Image Manual for:

​BoX2 base
BoX2 pro
BoX2 pro SC
BoX2 extreme
BoX2 extreme SC

• BoX2 Manual .pdf

X2/BoX2 Recognition for BV MODE II Scheme SMS.W.II.73696A.2 (PROD CERT - 1465046 - 1 - A1) - 1

• X2 Recognition for BV MODE II Scheme SMS.W.II.73696A.2 (PROD CERT - 1465046 - 1 - A1) - 1.pdf

BoX2 pro (SC), BoX2 extreme (SC) - ABS Type Approval Certificate

​ABS Type Approval Certificate for BoX2 pro (SC), BoX2 extreme (SC)

• ABS Certificate BoX2 IoT Gateways (PROD CERT - 1382938 - 1 - A1) - 1.PDF

IECEx Certificate X2 extreme (SC) / BoX2 extreme (SC)

• IECEx_UL_17.0058X_1.pdf

BoX2 pro (SC) / BoX2 extreme (SC) DNV - GL Type Approval Certificate

​DNVGL Type Approval Certificate box2 pro, box2 extreme

• DNVGL Certificate BoX2 IoT Gateways (PROD CERT - 1382943 - 1 - A2) - 1.PDF

BoX2 pro (SC) / BoX2 extreme (SC), SAFE COMPASS DISTANCE INFORMATION,

​Compass safe distance BoX2

• Compass safe distance BoX2.pdf

3D drawing BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) in STEP format

​3D drawing box2 extreme in STEP format

• BoX2 basic_3D.STEP
• BoX2 extreme_3D.STEP
• BoX2 pro_3D.STEP

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) brochure BREN638 (english)

• Box2 brochure_180517_pages.pdf
• Box2 brochure_180517_spreads.pdf